What Oil Filter Does a 2008 Ford Escape Use?

The 2008 Ford Escape uses an oil filter with the code F6AZ-6731-A. This filter is made by Purolator and has a part number of L14610.

The name of the oil filter used in a 2008 Ford Escape is the Motorcraft FL-820S.

An oil filter should be replaced every 3,000 miles or with every oil change, whichever comes first. A clogged oil filter can cause oil starvation and engine damage.

An oil filter helps remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Oil filters are used in many different types of hydraulic machinery. A properly functioning oil filter is important in extending the life of an engine, transmission, or other machinery. When oil becomes contaminated, it can cause premature wear on machinery components.

The filter removes impurities by trapping them in the filter media as the oil is forced through it by the pressure of the system. The most effective oil filters use pleated paper or fabric to increase the surface area over which the oil must flow. The oil is drawn through the pores of the filter media by a vacuum created as the oil passes through the filter.

As the oil filter traps contaminants, it becomes clogged. When this happens, the oil pressure in the system drops and the oil bypass valve opens, allowing unfiltered oil to flow around the filter element. It is important to change the oil filter at the recommended intervals to prevent damage to the engine or other machinery.

The benefits of replacing the oil filter are many. A new oil filter will trap contaminants that could cause premature wear on engine components. It will also help maintain proper oil pressure in the system, extending the life of the engine.

An oil filter is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil. Oil filters are used in many different types of hydraulic machinery. A chief use is in internal-combustion engines in on- and off-road motor vehicles, light aircraft, and various naval vessels. Other vehicle hydraulic systems, such as those in automatic transmissions and power steering, are often equipped with an oil filter. Filters are also used in many different types of industrial hydraulic machinery.

Oil filters work by trapping contaminants in the filter media as the oil passes through. The contaminants are typically particles of dust, dirt, metal, or other materials that can damage or clog machinery components. The media is usually a paper, cloth, or fiber element that is coated or impregnated with a pleated filter structure. As the oil flows through the pleats, the contaminants are trapped on or in the media.

The exact design of an oil filter depends on the application. For example, automotive oil filters must be able to withstand the high oil pressures found in an engine. Some filters are designed for a specific type of oil, such as synthetic oil or bio-based oil. Other filters are intended for use with multiple types of oil.

Most oil filters are designed to be disposable. Once the filter has reached its maximum capacity for trapping contaminants, it must be replaced. Some filters can be cleaned and reused, but this is not common.

The oil filter is a critical component of any hydraulic system. It helps to protect the system components from wear and damage by trapping contaminants before they can reach sensitive areas. By keeping the oil clean, the filter also helps to improve the system's overall efficiency.

The 2008 Ford Escape uses a synthetic oil. This is because the engine temperatures in this model are higher than in other models, and the synthetic oil performs better under these conditions. The oil change interval for the 2008 Ford Escape is 7,500 miles.

A 2008 Ford Escape holds approximately 10 quarts of oil. An oil change on a 2008 Ford Escape would typically require 4 quarts of oil.

Assuming you would like an answer to the question posed:

The Ford Escape is a crossover SUV that was first introduced in 2000. It is based on the Ford CD2 platform, which is also used by the Mazda Tribute. The Ford Escape is available with a four-cylinder engine or a V6 engine. It is typically recommended that the oil be changed every 7,500 miles or every six months, whichever comes first.

If you don't change the oil in your 2008 Ford Escape, the consequences could be serious. The oil is what keeps your engine lubricated and cool. When it starts to get low, the engine can overheat and cause severe damage. You could also end up with a blown engine or seizure.