What Oil Does a 2018 Jeep Cherokee Take?

The 2018 Jeep Cherokee takes 5W-30 oil.

If you don't change the oil in your 2018 Jeep Cherokee, the consequences can be pretty serious. Your engine can overheat, causing damage to the pistons, rods and bearings. Additionally, oil sludge can build up, clogging oil passages and leading to engine failure. In the best case scenario, you'll just end up with an expensive repair bill. In the worst case, you could be stranded on the side of the road with a failed engine. So, it's definitely worth it to keep up with your oil changes!

2018 Jeep Cherokees can use synthetic oil, conventional oil, or a blend of the two. Many people choose synthetic oil because it can last longer between changes and it protects the engine better in extreme temperatures. Some people choose conventional oil because it is less expensive. Some people choose a blend of the two because it offers a happy medium between the two options. Ultimately, the decision of which oil to use in a 2018 Jeep Cherokee is up to the owner.

For your interest: 2018 Toyota 4runner

A 2018 Jeep Cherokee uses just under 11 quarts of oil with the filter. This includes both 4 cylinder and 6 cylinder models. If you are just changing the oil, it will take less oil.

The 2018 Jeep Cherokee has a few symptoms that can signify low oil levels. One of the most common is the Oil Pressure Warning Light. This will illuminate on the instrument panel when the oil pressure is low. Another symptom is engine noise. When the oil level is low, the engine will often times make a knocking or ticking sound. Lastly, the engine may run less smoothly when low on oil.

Check this out: When Should I Take Bcaa's?

There are a few symptoms that you may experience if your 2018 Jeep Cherokee has too much oil in it. One symptom is that the engine may run rougher than usual. You may also notice that the oil pressure gauge is reading higher than normal or that there is oil seeping from the engine. If you experience any of these symptoms, it is important to have the Jeep checked by a mechanic as soon as possible.

The owner's manual for the 2018 Jeep Cherokee says to check the oil level at least once a month. You should also check it more often if you drive in stop-and-go traffic, in extreme cold or heat, or if you tow a trailer.

To check the oil level, park the Jeep on level ground and shut off the engine. Wait a few minutes for the oil to settle, then remove the dipstick and wipe it clean with a rag. Insert the dipstick all the way back in, then remove it again and check the level.

The oil level should be between the "full" and "add" marks on the dipstick. If it's low, add oil a little at a time until it reaches the full mark. Do not overfill it.

If you're not sure how to do this, or if you don't have the time, you can always take it to a Jeep dealership or a reputable oil change place and they'll be happy to do it for you.

Expand your knowledge: Why Would a Lawyer Not Take a Case?