How to Remove Inner Tie Rod without Tool?

Assuming you would like a step by step guide on how to remove an inner tie rod without any special tools:

1. Park your car on level ground and put on the emergency brake.

2. Place a jack under the lower control arm of the side you're working on to support the weight of the vehicle.

3. Remove the wheel.

4. Disconnect the tie rod end from the steering knuckle. This can be done by removing the nut and washer that hold it in place.

5. Use a tie rod separator tool or a large flathead screwdriver to remove the tie rod end from the inner tie rod.

6. With the tie rod end removed, the inner tie rod can now be unscrewed from the housing.

7. To remove the inner tie rod from the housing, first loosen the jam nut that holds it in place.

8. Then, use a tie rod separator tool or a large flathead screwdriver to remove the inner tie rod from the housing.

9. Once the inner tie rod is removed, the new one can be installed by reversing the above steps.

Worth a look: Why Are My Inner Thighs so Dark?

To remove an inner tie rod without a tool, first loosen the nut that secures the tie rod to the steering rack. Next, using a pry bar, lever the tie rod out of the steering rack. Finally, remove the tie rod end from the steering knuckle.

Suggestion: Can You Use Bleach on Your Areola?