How to Calibrate Ps4 Controller?

Select the device you are using to play your game. Right click on the controller, select Game Controller Settings. Select the correct device and then choose Properties. In the Settings tab of your controller’s properties, find Calibration and then hit the button to start calibration.

To calibrate the East controller in your PS4, go to Settings -> Control Settings -> General tab -> Buttons. There, you should be able to do a calibration on each axis (Directional Pad up/down, left/right thumbsticks, Cross button) by adjusting the sensitivity using the Cross button and Test Button.

1. First, turn off the PlayStation 4 controller. 2. Then, turn over the DualShock 4 controller and locate at the small hole near the left shoulder button. 3. There, you will need to unfold one end of the paper clip and insert it to the push the button buried inside the hole. 4. Once you have done that, press and hold down on the reset button until it starts blinking rapidly three times. (Note: If your console is turned off and you try to do a hard reset, Sony recommends that you power it back on first before attempting.)

1. First of all, openwindows 10 and sign in with your Microsoft account. 2. Next, click on the Start button and type “Bluetooth Settings” (without quotes). 3. Then you will see a list of Bluetooth devices available in your machine. 4. If the controller isn't listed under "Ports," make sure to check the box next to the controller name and click on "Enumerate." 5. Make sure that the controller is detected by Windows 10 and it should show up as an available device under "Devices." 6. Now follow these steps to fix any issues: 7. If there are problems connecting to the controller or if it doesn't work at all, try restarting both your Windows 10 PCand PS4 console» 8. If that doesn't solve the issue, you can try resetting your PS4 controller by selecting "Settings" on your device then selecting "Controller/Interface"» 9. After selecting "Reset

Open the Control Panel (icons view), and click/tap on the Devices and Printers icon. Under Devices, right click or press and hold on your controller's icon, and click/tap on Game controller settings. (see screenshot below) In Game controller settings window, under Calibrate button, set Output type as "$AV Endpoint$" and Connected device as "Your PC". (see screenshot below) Click/tap on Start calibration. (see screenshot below) After calibration is done, your game controller should be working properly with Windows 10.